Cross-docking in Seattle and Kent

Your freight does not need a warehouse. It needs a dock: somewhere to come off one truck, get sorted, and go onto the next one.

The short version

Storage you do not need is money spent on freight standing still. Cross-docking in Seattle skips it. A trailer or container backs up to a dock door at a warehouse in our Puget Sound network. The freight is unloaded, checked and sorted on the dock floor. Then it is loaded through another door onto the outbound truck. It is not put into a rack, and it is not given a storage position.

Often the freight is in and out on the same day. Sometimes it waits overnight for the outbound truck. Either way the timing depends on two appointments, so the job starts with a schedule: when the inbound arrives, when the outbound must leave, and what has to happen between them. That can be a straight transfer, a sort by store or purchase order, or new labels on every pallet.

Cross-dock work near Seattle usually runs through the Kent Valley. A cross dock in Kent, WA sits between the two ports, with I-5 on the west side and SR 167 through the valley, so a container from either port and a truck bound in either direction can meet in the middle. Send both ends of the move. A price for the dock work follows within one business day.

This fits when

  • An import container must be split across several stores or distribution centers.
  • LTL shipments from several suppliers should leave as one truckload.
  • A long-haul truck needs to hand off to local delivery trucks.
  • A load was refused and must be reworked before it is delivered again.
  • Freight for Alaska needs to be gathered near Tacoma before it sails.

What is included

  • Unload and reload

    Palletized freight moves by forklift from the inbound trailer to the outbound one. Floor-loaded freight is palletized first.

  • Sort and segregate

    One inbound load is split by store, purchase order, SKU or destination, and each group is staged for its own truck.

  • Consolidation

    Several small inbound shipments are combined into one full outbound truck.

  • Count and damage check

    Pieces are counted against the bill of lading as they cross the dock. Shortages and visible damage are noted before the outbound truck is loaded.

  • Labels and rewrap

    Pallets can be relabeled, cut down to a height limit or wrapped again before they leave.

  • The second truck

    If you have no carrier for the outbound leg, freight brokerage books the truckload or LTL move.

How it works

  1. Send both schedules

    When and how the freight arrives, when it must leave, the piece count, and what sorting or labeling is needed.

  2. Get the dock rate

    Within one business day you receive a rate for the dock work, with the unload, the sort and the reload shown.

  3. Book the doors

    The inbound appointment is set, and the outbound truck is scheduled behind it.

  4. Freight crosses the dock

    It is unloaded, checked, sorted and reloaded. You receive the counts and the outbound paperwork.

What it costs

Cross-docking is billed per pallet handled, or per load when the freight is floor-loaded. Sorting, labeling and rewrapping are added by the pallet or by the hour. Because the freight does not go into storage, there is no monthly storage charge unless it waits longer than agreed. No market range is given here, because the price depends on the piece count and the work done on the dock. Ask for a rate on your load.

  • A written quote within one business day.
  • Every charge listed before the freight moves.
  • Faster by phone when the freight is already on its way.

Cross-docking: questions

How does cross-docking in Seattle work?

Freight is unloaded from an inbound truck or container, sorted on the dock, and loaded onto an outbound truck without going into storage. The dock is usually in the Kent Valley, between the Port of Seattle and the Port of Tacoma.

Is cross-docked freight turned on the same day?

Often, but it is not promised. The turn depends on the inbound arriving on time and the outbound truck being booked behind it. Ask for the expected turn when you request the quote.

How long can freight sit on the dock?

A cross dock is for freight that leaves soon after it arrives, not for storage. If the outbound truck is delayed, the freight can move into short-term warehousing and is billed by the pallet from then on.

Can a container be cross-docked straight from the port?

Yes, the container is drayed from the terminal to the dock, emptied and reloaded into domestic trailers. When a whole container moves into trailers this way, it is called transloading.

What do you need to quote a cross dock in Kent, WA?

The piece or pallet count, the weights, the inbound and outbound dates, and any sorting or labeling required. With those four things the rate can be worked out without a second round of questions.

Get a cross-docking quote

You get a written quote within one business day. Tell us what the freight is, how much there is and when it arrives. The more exact the details, the more exact the number.

Freight arriving this week? Call (419) 745-9492. A call is answered before an email.

Or write to operations@sams3pl.com.

Get a quoteCall