A 3PL charges by activity: setup, receiving, storage, pick and pack, packaging, shipping and special projects, often with a monthly minimum. Published market ranges for greater Seattle are $5 to $15 per pallet for receiving, $18 to $25 per pallet per month for storage and $2 to $3 per order for pick and pack. These are market ranges, not our quote.
You asked two warehouses for prices and got two quotes that do not line up. One lists six fees, the other lists eleven, and neither gives a monthly total. That is normal. 3PL cost in Seattle is built from a separate charge for each thing the warehouse does to your freight, and your total depends on how much of each you use. Once you know the fee types, any quote becomes readable.
The fees on a 3PL quote
| Fee | What it covers | What drives it |
|---|---|---|
| Setup | Opening the account, loading your items into the inventory system, connecting your store or order feed | Number of items, number of connections |
| Receiving | Unloading, counting against your paperwork, noting damage, put-away | Pallets, cartons or containers received, and how the freight is loaded |
| Storage | The positions your stock holds each month | Pallet count, pallet size, bins or shelves used |
| Pick and pack | Picking the items for an order, packing and labeling | Orders shipped, items per order |
| Packaging materials | Boxes, mailers, fill, tape, pallets, stretch wrap | Package size, and whether you supply your own |
| Shipping | Parcel, LTL or truckload freight out | Weight, size, distance, speed |
| Special projects | Kitting, relabeling, returns, inspection, rework | Labor hours or units |
| Account minimum | A floor under the monthly bill | The warehouse’s policy and your volume |
Three of these have published market ranges for greater Seattle:
- Receiving: $5 to $15 per pallet
- Storage: $18 to $25 per pallet per month
- Pick and pack: $2 to $3 per order
These are market ranges, not our quote. The other fees vary too much from one account to the next to put a range on. They are quoted for your freight. More on each is on the pricing page.
What to know about each fee
Setup
Setup is charged once. A shipper storing full pallets of one product may see little or none. An online store with hundreds of items and a shopping cart to connect will see more.
Receiving
The market range is per pallet. A container loaded loose on the floor has to be unloaded by hand and built onto pallets, which is priced differently, often per container or per hour. See container unloading. Freight that arrives without labels or a packing list takes longer and may be charged extra.
If your freight comes by container through Seattle or Tacoma, the truck move from the terminal to the warehouse is a separate charge from receiving. It is quoted per container. See port drayage.
Storage
Pallets are the common unit, but small items may be billed by the shelf or bin. Ask how the count is taken each month, and whether a pallet that arrives mid-month is billed for the full month.
Pick and pack
The market range is per order. Many quotes add a charge for each extra item in the order. If your typical order has four items, that second number matters more than the first.
Packaging and shipping
Materials are either charged per piece or built into the pick fee. Shipping is the carrier’s charge, billed on your account or the warehouse’s. Ask which, and ask whether the warehouse adds a margin.
Special projects and minimums
Project work is usually hourly. The minimum applies when your month’s fees come to less than the floor. A new account with low volume should expect to pay it at first.
How to compare two 3PL quotes line by line
- Write down one typical month in units: pallets received, pallets stored, orders shipped, items per order, hours of project work.
- Put both quotes in one sheet, with a row for each fee in the table above.
- Match the names. One warehouse’s “handling” may be another’s “receiving” plus “put-away”. Where one quote has a row the other lacks, ask whether the fee is included or was left off.
- Check the units. Per pallet is not per carton. Per order is not per item.
- Multiply each rate by your units and add up the column.
- Apply the minimum. If the column total is below it, the minimum is your bill.
- Repeat for your slowest month and your busiest month.
The quote with the lower rates is not necessarily the lower bill. A low storage rate with a high minimum can cost more than the reverse. If a warehouse will send a sample invoice for an account like yours, ask for it. An invoice shows fees that a rate sheet leaves out.
What pushes the bill above the quote
- Inbound freight that arrives unannounced, unlabeled or mixed
- More items than you listed at setup
- Returns, which are handled one at a time
- Stock that sits for many months without moving
- Rush orders after the daily cutoff
Each is avoidable, or at least predictable. Ask what the charge is for each before you start.
Put real numbers on it
For storage alone, the pallet storage cost estimator applies the market ranges to your pallet count. If most of your work is orders, read ecommerce fulfillment first. For a full quote, send your typical month: pallets in, pallets stored, orders out. Within one business day you get a quote that lists each fee and any minimum. If freight is arriving this week, call (419) 745-9492.