Warehouse space in Seattle is priced three ways. A lease charges a rate per square foot per year plus taxes, insurance and maintenance, and you add labor, racking and equipment. Flex or shared space charges for a smaller area on shorter terms. 3PL storage charges per pallet: the published market range is $18 to $25 per pallet per month, not our quote.
You need a place for freight near Seattle, and you want one number: what the space will cost each month. The trouble is that warehouse space cost in Seattle is quoted in three different units. A landlord quotes per square foot per year. A shared space quotes per month for an area. A 3PL quotes per pallet. Until you put them in the same unit, you cannot compare them.
This article does not print lease rates. They change by district, by building and by the month you ask, and we have no verified figures to give you. A commercial real estate broker has current ones. What follows is how each price is built.
How a warehouse lease is priced
A lease quote has two parts, and both are stated per square foot per year.
- Base rent. The rate times the square feet you lease.
- NNN charges. NNN means triple net: you also pay your share of the building’s property taxes, insurance and maintenance. These are quoted as a separate amount per square foot and can change each year.
Add the two and you have the cost of the empty building. A working warehouse costs more, because the lease leaves these to you:
- Labor to receive, put away, pick and ship
- Racking, and often a permit to install it
- Forklifts, batteries or fuel, and operator training
- Power, heat, water and internet
- Inventory software and scanners
- Insurance on your goods
- A deposit, and any changes you make to the space
What drives the lease rate
- District. SODO, Georgetown and South Park are Seattle industrial districts. The Kent Valley, between the two ports, is the region’s main warehouse district. Fife and Sumner are on the Tacoma side. Ask the broker to quote more than one, because the rate changes with the district and so does your trucking bill.
- Size. Small spaces often cost more per square foot than large ones.
- The building. Clear height, the number of dock doors, trailer parking and age all move the rate.
- Term. Lease length changes the rate. Ask for quotes at more than one term.
How flex and shared space is priced
Flex space is a smaller unit, usually part office and part warehouse, often with a roll-up door instead of a dock. It is still a lease, priced per square foot plus charges, with terms that are often shorter.
Shared space means you take part of a warehouse that another company holds: a marked section of floor or a block of rack positions. It is usually priced as a flat monthly amount for the area or per position, and the term is often short. What is included varies a great deal, so ask:
- Who unloads the truck, you or them
- Whether forklift use is included
- What hours you can reach your freight
- Who insures the goods
How 3PL storage is priced
A 3PL does not sell square feet. It sells pallet positions and labor. Published market ranges for greater Seattle are $18 to $25 per pallet per month for storage and $5 to $15 per pallet for receiving. These are market ranges, not our quote.
The storage rate already holds the rent, the racking, the forklifts and the utilities. Labor is charged when a pallet is touched. Pallet storage is usually month to month, so the bill follows your count up and down.
| Lease | Flex or shared space | 3PL storage | |
|---|---|---|---|
| Priced by | Square foot per year, plus NNN charges | Square foot, or a flat monthly amount | Pallet position per month |
| Usual term | Several years | Shorter, varies | Month to month |
| Included | The empty building | The space, sometimes dock and forklift use | Space, racking, equipment, utilities |
| You add | Labor, racking, equipment, utilities, systems | Usually your own labor | Receiving and handling fees |
How to turn a pallet count into leased square feet
To compare a lease with a per-pallet rate, you first need to know how much floor your pallets would take. The method, in principle:
- Start with your peak pallet count. A lease cannot shrink in a slow month, so the building must fit the busiest one.
- Take the floor area of one pallet. A standard pallet is 40 by 48 inches, which is a little over 13 square feet.
- Divide by the number of levels you can store. Rack levels depend on the building’s clear height and on your pallet height and weight. Without rack, the number is how high your product can safely stack, which may be one.
- Add aisles. Forklifts need room to turn, and the aisle width depends on the type of forklift.
- Add the floor that stores nothing: dock staging, a packing area, an office, battery charging.
- Round up to a space that is on the market. Buildings come in fixed sizes.
Steps 4 and 5 often add more floor than first-time tenants expect. A racking vendor can draw a layout for a specific building and give you an exact position count.
Then put both options in the same unit
Multiply the square feet by the base rent plus NNN charges, and divide by twelve. Add monthly labor, equipment, utilities and systems. Divide the total by the average number of pallets you store, not the peak. The result is your leased cost per pallet per month, and you can set it beside a 3PL’s per-pallet quote. The pallet storage cost estimator gives you the 3PL side using the market ranges.
Which way to buy space
A lease suits freight that fills a building all year. Per-pallet storage suits freight that rises and falls, or a count too small to fill a lease. Shared space suits a shipper with their own crew and a small footprint. 3PL vs leasing a warehouse compares the first two in detail. If you are looking for space now, start with warehouse space in Seattle.
Get both numbers
Ask a commercial broker for current lease quotes in the districts that fit your freight. Then send us your pallet count, dimensions and expected stay, and you get a per-pallet quote within one business day. With both in hand, the method above tells you which costs less at your volume.